You are here:Home > Ramset Pins & Loads > Powder Loads
Choose a sub category:
.27 Caliber Strip Loads .25 Caliber Disc Loads .25 Caliber Strip Loads
Powder loads for use in Hilti, Ramset, Powers, Simpson, Remington and other powder actuated tools. Quality Ramset loads meet or exceed safety and performance standards for all tools. With any powder actuated tool, start with a lower power level and work your way up. Power level of the loads is designated by number, the higher the number the more power, and by color, starting with brown as the weakest followed by green, yellow, red and finally purple. If you are not sure what type of load your tool takes, give us a call.
POWDER LOADS ARE CANNOT SHIP VIA AIR, USP GROUND SHIPPING ONLY!
  • .27 Caliber Strip Loads

    .27 Caliber strip loads for Ramset, Hilti, Powers, Simpson, Remington and others.  .27 Caliber strip loads are one of the most common types of loads.  For use in the Ramset Cobra, SA270, Rocket, Hilti DX350, DX36M, DX460, DXA41, Powers R3500, Simpson PT27 and others.  If you are not sure what load your tool takes, give us a call.
  • .25 Caliber Disc Loads

    .25 Caliber Ramset disc loads for the D60, D60L, D45, D45, Autofast and the Powers disc tools.  Available in brown, green, yellow and red loads (red only for D45 and D45A tools).  All disc loads packed 100 per box.  If you are not sure what load your tool uses, give us a call and we can help.
  • .25 Caliber Strip Loads

    .25 Caliber strip loads for Ramset, Hilti, Powers, Simpson, Remington and others.  .25 Caliber strips are used in the Hilti DX35, Ramset  S25, Powers P35S, Simpson PT25 and others.  If you are not sure what load your tool takes, give us a call.