Why Use Pre-Cut EMT Wall Sleeves?
Installing a short section of EMT through a wall can be surprisingly time-consuming when starting with a full 10-foot stick of conduit. The EMT must be measured, cut square, deburred, and fitted with the appropriate bushings. For a single wall penetration or a project requiring multiple short sleeves, this can add unnecessary labor to the installation.
Our pre-cut EMT wall sleeves arrive already cut to length and prepared for installation. This saves time on the job and eliminates the need to purchase and transport a full length of EMT when only a short sleeve is required.
EMT Sleeves for Low-Voltage & Data Cable
These EMT wall sleeves are particularly useful for contractors installing structured cabling and communications systems. They provide a durable metal pathway through walls for network cable, Cat 5e, Cat 6, Cat 6A, fiber optic cable, and other low-voltage wiring.
Using a dedicated wall sleeve can help organize cable penetrations and provide a consistent opening for cable pathways between rooms, floors, and other areas of a building.
Pre-Cut, Deburred & Ready to Install
Our sleeves are supplied in convenient 12" lengths and are prepared to save installation time. Our EMT wall sleeve includes an Arlington hammer-on bushing installed, along with an additional loose bushing. This eliminates the need to cut and prepare the EMT or source the bushings separately.
EMT Wall Sleeves for Firestop Applications
EMT sleeves can be used as part of a wall penetration system where firestopping is required. When a cable penetration passes through a fire-rated wall or other fire-resistance-rated assembly, the appropriate firestop system must be selected and installed according to the requirements of the specific application.
Our pre-cut EMT sleeves provide the metal sleeve component, while compatible firestop products can be used where required to complete the penetration system.
Available EMT Sleeve Sizes
We offer pre-cut EMT wall sleeves in the following common sizes:
- 1" EMT wall sleeves
- 2" EMT wall sleeves
- 3" EMT wall sleeves
- 4" EMT wall sleeves
These sizes cover many of the common wall sleeve requirements encountered in structured cabling, telecommunications, electrical, and low-voltage installations.
Make Sleeve Installation Faster
Pre-cut EMT sleeves are especially useful when a project requires only a few short sections of conduit. Instead of purchasing a full stick of EMT, transporting it to the jobsite, cutting it to length, and deburring the ends, you can order the sleeve size you need and install it when you are ready.
This can be particularly valuable for service work, smaller installations, and projects where material needs to be shipped directly to the jobsite.
A Convenient EMT Sleeve Solution for Contractors
Construction Fastening Systems provides both the pre-cut EMT wall sleeves and the installation accessories needed to make wall sleeve installations easier. Whether you need a single sleeve for a service project or multiple sleeves for a larger structured cabling installation, pre-cut EMT saves the time and labor associated with preparing EMT in the field.
Browse our selection of pre-cut EMT wall sleeves to find the size you need for your next data cable, communications, or low-voltage installation.
|
