Eye Lag Pole Parts: What You Need to Know
Eye lag poles generally fall into two categories:
two-stage and three-stage. While some parts are interchangeable, others are specific to the pole type and diameter.
You will also find some poles also feature
interchangeable heads (plugs), allowing one tool to handle multiple applications. The Lagmaster A Plus and the The Lagmaster Plus are a couple examples.
Two-Stage Eye Lag Poles (Double Poles)
A two-stage eye lag pole consists of two sections: an inner pole and an outer pole. These are commonly referred to as “doubles.” The outer drive pole has an inner diameter of 1-1/8" so you would use the smaller driver,
LM-DRIVER-S
Common Replacement Parts for Two-Stage Poles
- Driver end (drill connection): LM-DRIVER-S
- Bale Pins. Tend to get lost.
If your pole has interchangeable heads, you can upgrade using a retrofit kit or add a base and select heads individually.
Three-Stage Eye Lag Poles (Triple Poles)
A three-stage eye lag pole includes three sections: top, middle, and bottom. These are commonly called “triples” and are ideal for higher ceiling applications. The outer drive or bottom pole has an inside diameter of
1-1/4" so you would use LM-DRIVER-L. The head portion of the tool remains the same as the double eye lag pole.
Common Replacement Parts for Three-Stage Poles
- Driver end: LM-DRIVE-L
- Bale Pins. Tend to get lost.
Eye Lag Pole Replacement Heads (Standard Poles)
If your pole has non-interchangeable heads, you’ll need to select the correct head style. The standard Lagmaster is an example of a lag pole without interchangeable heads.
Head choices include
- Standard welded ring head
- Set screw ring head
- Pre-tied eye lag head
Standard poles can often be converted to interchangeable systems with the right retrofit components.
See the LMPK Retro Kit
Interchangeable Head Eye Lag Pole Parts (Plugs & Accessories)
Available Replacement Heads & Accessories
- Standard welded ring
- Set screw ring
- Pre-tied wire plug
- Purlin clip head
- 1/2" NPT plug for bar joist tools
- Threaded rod hanger plugs
- 1/4” hex adapter
- 1/2” square socket adapter
- Broom thread attachment
- Keyless chuck adapter
Which Eye Lag Pole Parts Wear Out Most?
- Driver ends
- Bale pins often get misplaced.
Who Uses Eye Lag Pole Parts?
Used by acoustical ceiling contractors, electricians, low-voltage installers, HVAC technicians, and more.
FAQ: Eye Lag Pole Parts
What is the difference between a two-stage and three-stage eye lag pole?
A two-stage pole has two sections, while a three-stage pole has three sections for added reach.
Are eye lag pole heads interchangeable?
Some poles have fixed heads, while others use interchangeable plugs. Always confirm compatibility.
What replacement parts wear out most often?
Driver ends, heads, and adjustment pins are the most commonly replaced parts.
Can I upgrade my existing eye lag pole?
Yes, many standard poles can be upgraded to interchangeable systems using retrofit kits or conversion bases.
Your Source for Eye Lag Pole Replacement Parts
We make it easy to find the right eye lag pole replacement parts, heads, and accessories for your specific tool. Whether you’re maintaining a single pole or outfitting a full crew, we help keep your equipment working—not sitting on the sidelines.
|
