You are here:Home > Concrete Anchoring > ITW/Buildex Tapcon Screws > 1/4" Diameter Tapcon
Original ITW/Buildex Tapcon concrete screws. 1/4" Diameter Tapcon concrete screws are easy to install, just drill 3/16" hole and drive in. Available in flat head phillips and hex head, standard blue climaseal or stainless steel. Click here for our selection guide and performance data.
Sort By:
Page of 1
Phillips Flat Head Tapcon Concrete Screw 1/4" x 1-1/4" Hex Head Tapcon Concrete Screw 1/4" x 1-1/4" Flat Head Tapcon Concrete Screw 1/4" x 2-3/4"
Flat head phillips drive 1/4" x1-1/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material up to 1/4"  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.  #3 Phillips drive. Flat head phillips drive 1/4" x1-1/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material up to 1/4"  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.  #3 Phillips drive. Flat head phillips drive 3/16" x 2-3/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less. This is the correct selection for fastening 2 x 4 material to concrete. For fastening material 1-1/4" to 1-3/4".  Simply drill 3/16" hole, at least 1/4" deeper than the anchor and drive in.  #3 Phillips drive.
Hex Head Tapcon Concrete Screw 1/4" x 2-3/4"
Flat head phillips drive 3/16" x 2-3/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less. This is the correct selection for fastening 2 x 4 material to concrete. For fastening material 1-1/4" to 1-3/4".  Simply drill 3/16" hole, at least 1/4" deeper than the anchor and drive in.  #3 Phillips drive.