You are here:Home > Ramset Pins & Loads
Pins and loads for Ramset, Hilti, Powers, Simpson and other powder actuated tools. Top quality loads for Ramset are designed for use in any powder actuated tool. If you are looking for pins or clips for your tools, we have a full line dealer so if you don't see what you are looking for, give us a call and we likely stock it.
  • BX & EMT Straps

    BX & EMT conduit straps for use in Hilti, Ramset and other powder actuated tools.  Available in BX size, 1/2",3/4" and 1"
  • Shooter Clip Assemblies

    SC14 shooter clips are designed for use in most Ramset, Hilti, Simpson, Powers and other makes powder actuated tools. Each clip has a 1/4-20 all thread pre attached and ready to go, no assembly required. Available in 12",18",24" and 36" lengths, these assemblies are truly versatile. What can you use the SC14 series rod hangers for? They are perfect for data cable hangers, boxes, emt, flex cable, access points and so much more.
  • Ceiling Clips

    Ceiling clips for Ramset and Hilti guns along with most powder actuated tools.  Also available pre tied to grid wire.  Clips made in USA.  Choose from our standard clip to our most popular SPC78 and SPC114 clips with a ballistic point for hard concrete.
  • Insulation Fasteners

    These pins are designed for fastening foam onto concrete. Each pin has a 1-7/16" metal stress plate to hold foam in place. Available in lengths from 1-1/2" to 3". For use in Hilti, Ramset and other powder actuated tools. If do a lot of this type of work, consider using the Ramset D45A tool. The D45A is designed for overdrive applications and holds up better than most tools for this type of work. Need large quantities? Give us a call for a price quote.
  • Pins, Nails, Studs

    Nails and studs for use in Ramset, Hilti, Simpson, Powers, Remington and other powder actuated tools.  We are a full line Ramset dealer so give us a call if you don't see what you are looking for.
  • 3/8" Stud Gun Supplies

    3/8" Stud Gun Supplies.  Used for years by sprinkler fitters, mechanical trades and others, 3/8" stud guns make installing threaded rod to concrete and steel fast!  Our studs will fit the Hilti DX600, Powers P3801, Ramset MD380, Simpson PT-27D and other 3/8" stud guns.
  • Powder Loads

    Powder loads for use in Hilti, Ramset, Powers, Simpson, Remington and other powder actuated tools. Quality Ramset loads meet or exceed safety and performance standards for all tools. With any powder actuated tool, start with a lower power level and work your way up. Power level of the loads is designated by number, the higher the number the more power, and by color, starting with brown as the weakest followed by green, yellow, red and finally purple. If you are not sure what type of load your tool takes, give us a call.
    POWDER LOADS ARE CANNOT SHIP VIA AIR, USP GROUND SHIPPING ONLY!
Sort By:
Page of 2
3/4" Nail With Washer for Ramset, Hilti Tools Box of 100 2 Nail With Washer for Ramset, Hilti Tools Box of 100 2-1/2" Nail With Washer for Ramset, Hilti Tools Box of 100
CLEARANCE!
3/4" Nail With Washer for Ramset, Hilti Tools Box of 100.
CLEARANCE!
2" Nail With Washer for Ramset, Hilti Tools Box of 100.
CLEARANCE!
2-1/2" Nail With Washer for Ramset, Hilti Tools Box of 100.
3" Nail With Washer for Ramset, Hilti Tools Box of 100 1" Nail for Ramset, Hilti Tools Rod Hangers For Hilti & Ramset Tools
CLEARANCE!
3" Nail With Washer for Ramset, Hilti Tools Box of 100.
1" Nails for with washer. Box of 100. Use in Ramset, Hilti, Simpson, Powers, Remington and other powder actuated tools. SC1412 Hanger 1/4" x 12" Pack Of 10 These rod hanger assemblies are great for hanging data cable hangers, boxes, emt, flex cable and so much more. Anything you need to hang on 1/4" rod can now be installed faster with the SC14 series of shooter clips. For use in most Hilti, Ramset, Powers and other PAT tools. Give them a try you will see why these are one of our better selling hangers.
1-1/4" Nail for Ramset, Hilti Tools 2D60 .25 Caliber Brown Disc Load 3D60 .25 Caliber Green Disc Load
1-1/4" Nails for with washer. Box of 100. Use in Ramset, Hilti, Simpson, Powers, Remington and other powder actuated tools. .25 caliber brown disc load. Box of 100.
SHIPS UPS GROUND ONLY!
3D60 .25 caliber brown disc load. Box of 100.
NO LONGER AVAILABLE
Rod Hangers For Hilti & Ramset Tools Rod Hangers For Hilti & Ramset Tools 5D45 .25 Caliber Red Disc Load
SC1418 Hanger 1/4" x 18" Pack Of 10 These rod hanger assemblies are great for hanging data cable hangers, boxes, emt, flex cable and so much more. Anything you need to hang on 1/4" rod can now be installed faster with the SC14 series of shooter clips. For use in most Hilti, Ramset, Powers and other PAT tools. Give them a try you will see why these are one of our better selling hangers. SC1424 Hanger 1/4" x 24" Pack Of 10 These rod hanger assemblies are great for hanging data cable hangers, boxes, emt, flex cable and so much more. Anything you need to hang on 1/4" rod can now be installed faster with the SC14 series of shooter clips. For use in most Hilti, Ramset, Powers and other PAT tools. Give them a try you will see why these are one of our better selling hangers. .25 caliber red disc load. Box of 100.
NO LONGER AVAILABLE
3/8" Red Load For Hilti  Ramset Simpson Powers 4D60 .25 Caliber Yellow Disc Load 3/4" EMT/Conduit Strap For HIlti & Ramset Tools
.27 Caliber Long Red Load For 3/8" Stud Guns 4D60 .25 caliber yellow disc load. Box of 100.
SHIPS UPS GROUND ONLY!
3/4" EMT/Conduit Strap With Pin Box of 50. Use with Ramset Hilti & other powder actuated tools for fastening 3/4" EMT Conduit to masonry materials. Pre assembled with 1" powder actuated nail, .300 head. Also available in sizes for BX Cable, 1/2" and 1" EMT conduit.
Rod Hangers For Hilti & Ramset Tools .27 Caliber Green Strip Load .27 Caliber Yellow Strip Load
SC1436 Hanger 1/4" x 36" Pack Of 10 These rod hanger assemblies are great for hanging data cable hangers, boxes, emt, flex cable and so much more. Anything you need to hang on 1/4" rod can now be installed faster with the SC14 series of shooter clips. For use in most Hilti, Ramset, Powers and other PAT tools. Give them a try you will see why these are one of our better selling hangers. .27 Caliber green strip load, Box of 100. For use in the Ramset Cobra, Viper and Rocket, Hilti, DX350, DXA41, DX460, Powers RS3500, Simpson PT27 and any other .27 caliber strip tool. If you are not sure what load to choose for your tool, give us a call. .27 Caliber yellow strip load, Box of 100. For use in the Ramset Cobra, Viper and Rocket, Hilti, DX350, DXA41, DX460, Powers RS3500, Simpson PT27 and any other .27 caliber strip tool. If you are not sure what load to choose for your tool, give us a call.
.27 Caliber Red Strip Load Ceiling Clip For Ramset & Hilti Tools SDC125 Standard Ceiling Clip
.27 Caliber red strip load, Box of 100. For use in the Ramset Cobra, Viper and Rocket, Hilti, DX350, DXA41, DX460, Powers RS3500, Simpson PT27 and any other .27 caliber strip tool. If you are not sure what load to choose for your tool, give us a call. Ramset SDC100 Ceiling Clip. Box of 100. Ramset SDC125 Ceiling Clip. Box of 100.
1" EMT/Conduit Strap For HIlti & Ramset Tools 2-1/2" Nail for Ramset, Hilti Tools 1-7/8" Nail for Ramset, Hilti Tools Shoot 2x To Steel Ramset SP178
1" EMT/Conduit Strap With Pin Box of 50. Use with Ramset Hilti & other powder actuated tools for fastening 1" EMT Conduit to masonry materials. Pre assembled with 1" powder actuated nail, .300 head. Also available in sizes for BX Cable, 1/2" and 3/4" EMT conduit. 2-1/2 " Nails for with washer. Box of 100. For use in treated lumber. Use Ramset, Hilti, Simpson, Powers, Remington and other powder actuated tools. This is the most common nail used for fastening 2x material to concrete. These pins are coated for use in treated lumber. Also available in 3" length. 1-7/8" Nail for Ramset, Hilti Tools Shoot 2x To Steel Box of 100

Simpson Premium Ceiling Clip Box Of 100 BX Cable Strap for Hilti & Ramset Tools DeWalt CSI Spiral Pin/Clip 1" Box of 100
BX Cable Strap Box of 100
$29.00 Our Price:
Simpson Premium Ceiling Clip Box Of 100 BX Cable Strap With Pin Box of 100. Use with Ramset Hilti & other powder actuated tools for fastening BX cable to masonry materials. Pre assembled with 1" powder actuated nail, .300 head. Also available in for 1/2", 3/4" and 1" EMT conduit. DeWalt CSI Spiral Pin/Clip 1" Box of 100.
DeWalt Ceiling Clip .177 Shank 1-1/4" Box of 100 1/2" EMT/Conduit Strap For HIlti & Ramset Tools Ramset SPC78 Premium Ceiling Clip
DeWalt Ceiling Clip .177 Shank 1-1/4" Box of 100 1/2" EMT/Conduit Strap With Pin Box of 100. Use with Ramset Hilti & other powder actuated tools for fastening 1/2" EMT Conduit to masonry materials. Pre assembled with 1" powder actuated nail, .300 head. Also available in sizes for BX Cable, 3/4" and 1" EMT conduit. Ramset SPC78 Ceiling Clip. 100 Pieces.