Home > Concrete Anchoring > Sleeve Anchors >

3/8" x 4" Phillips Flat Sleeve Anchor 50 Pieces
3/8" x 4" Phillips Flat Sleeve Anchor 50 Pieces
 
$35.65 Our Price:


Product Code: SL37400PF
Qty:

Description
 
3/8" x 4" Phillips Flat Sleeve Anchor 50 Pieces. Flat head anchors are commonly used to install metal door frames in commercial construction.  Sleeve anchors are designed for use in hollow masonry materials such as block and brick.  Installation is simple, drill hole at anchor diameter, clean hole, insert anchor and tighten. Minimum embedment, 1-1/2".


Browse for more products in the same category as this item:

Concrete Anchoring > Sleeve Anchors
Install Hardware/Anchors/Beam Clamps/Fasteners > Hollow Metal Door Frame Mounting Hardware
Install Hardware/Anchors/Beam Clamps/Fasteners
Concrete Anchoring


1/4" X 4" x 6" SDS Hammer Bit $3.95
10 x 2" Hex Self Drill #3 Point 250 Pieces $27.95
1/4" x 3" Simpson Titen HD Concrete Anchor Box of 50 $48.25
90° Angle Clip NO PIN 14 Gauge 100 Pieces $22.95
Pan Sheet Metal Screws 8 x 1-1/4" Box Of 500 $17.95
Piston Disk Simpson PTP27L Tool $21.95
1/2" x 12" Simpson Titen HD Concrete Anchor Box of 5 $74.85
Rubber Returner For Simpson PTP27L Tool $19.95