Home > Install Hardware/Anchors/Beam Clamps/Fasteners > Angle Clips >

45° Angle Clip 12 Gauge Box of 100
45° Angle Clip 12 Gauge Box of 100
 
$67.95 Our Price:


Product Code: HOCL-45C
Qty:

Description
 
45° Angle Clip 12 Gauge Box of 100.  (Bulk is available) The HOCL-45 is a medium duty 45 degree angle clip. This clip complies with California DSA IR 25-2 [see figure 4(B) on page 9]. Recommended for use with splayed bracing wire.
Features
  • 1 Gauge
  • 1" Wide (approximate)
  • 1" Leg Length (approximate)
  • One 3/16" Hole (approximate)
  • One 3/8" Hole (approximate)
  • Zinc Plated


Browse for more products in the same category as this item:

Install Hardware/Anchors/Beam Clamps/Fasteners > Angle Clips
Install Hardware/Anchors/Beam Clamps/Fasteners


1/4" X 4" x 6" SDS Hammer Bit $3.95
SDS Max Hammer Drill Bit 1" x 17" $84.95
Vega IMPACTECH TORX Carabiner Driver Set $18.95
14 x 1" Hex Self Drill #3 Point 250 Pieces $39.95
Lagmaster Plus Vertigo Plug $51.25
SDS Max Hammer Drill Bit 3/4" x 13" $61.95
Arlington EMT350 Press Fit Insulation Bushings $174.95
12 x 3/4" Hex Self Drill #3 Point 500 Pieces $31.95
90° Angle Clip NO PIN 14 Gauge 100 Pieces $22.95