Products

Business Info


Join our mailing list!








Arlington TL25 2 1/2" Loop w/Hammer on Clamp Box of 50 2-1/2" Insulation Pin for Ramset, Hilti Tools (100)
$115.00Our Price:
$14.30Our Price:
Arlington TL25 2 1/2" Loop w/Hammer On Clamp
Arlington TL25 Loop mounted on a hammer on clamp  This clamp will clamp on to a 1/8" to 1/4" flange.  The Loop can than be rotated any direction.   UL listed, and approved for use in air handling spaces.  Holds up to a 2 1/2" bundle of cable securely.  Opens easily to add more cable.  Box of 50. 2-1/2" Pin with 1-7/16" washer. Box of 100. For fastening foam and other materials to concrete. Use in Ramset, Hilti, Simpson, Powers, Remington and other powder actuated tools. Need larger quantities? Give a call for a quote!
JH32 2" J Hook Box of 50 32 Piece Tamper Proof Bit Tip Kit
$99.00Our Price:
$24.95Our Price:
2" J Hook 32 Piece Tamper Proof Bit Tip Kit
2" J Hook.  Holds up to a 2"  bundle of cable.  Our customers are saving 30%-40% and more over brand name j hooks, now you can too!.  This UL listed j hook is also available in a variety of configurations to save you money on your next install.!  Box of 50. Here is a nice quality security bit tip kit that will cover most applications.  Kit includes a quick release bit holder and a square drive bit holder and the following tips: Phillips Security 2, 3; Spanner 4, 6, 8, 10, 12, 14; TORX Tamper Proof 10 ,15, 20, 25, 27, 30, 40; Hex Tamper Proof 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16; Square 1, 2, 3.  These are quality bit kits.
JH32AC 2" J Hook Box of 50 Powers 4054 1/4" Strap Toggle
$119.50Our Price:
$31.95Our Price:
2" J Hook Powers 4054 1/4" Strap Toggle
2" J Hook with angle bracket. Box of 50. 2" j hook with angle bracket. Bracket has 1/4" hole for mounting with 1/4" rod or hardware. Also great choice for fastening directly to the ceiling with a screw or concrete anchor. Holds up to a 2" bundle of cable. Powers 4054 1/4" Strap Toggle Box of 50. The Powers Strap toggle is makes fastening to drywall so much easier than with a standard toggle bolt. Simply drill a 1/2" hole, insert the metal bar and zip up the ring. Then break off the straps and you have a 1/4" mount that stays in place, even when you remove your screw. If you are using the Toggler Brand Snap toggle, give these a try and save on your next project. Screws not included, order screw here.