You are here:Home > Concrete Anchoring > ITW/Buildex Tapcon Screws > 3/16" Diameter Tapcon
Original ITW/Buildex Tapcon concrete screws. 3/16" Diameter Tapcon concrete screws are easy to install, just drill 3/16" hole and drive in. Available in flat head phillips and hex head, standard blue climaseal or stainless steel. Click here for our selection guide and performance data.
Sort By:
Page of 1
Flat Head Tapcon Concrete Screw 3/16" x 1-1/4" Hex Head Tapcon Concrete Screw 3/16" x 1-1/4" Flat Head Tapcon Concrete Screw 3/16" x 1-3/4"
Flat head phillips drive 3/16" x1-1/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material up to 1/4"  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.  #2 Phillips drive. Hex Head Tapcon Concrete Screw 3/16" x 1-1/4" Box of 100 Flat head star drive 3/16" x1-3/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material up to 3/4", good for mounting 3/4" plywood or 1x material.  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.  #2 Phillips drive.
Hex Head Tapcon Concrete Screw 3/16" x 1-3/4" Phillips Flat Head Tapcon Concrete Screw 3/16" x 2-1/4" Hex Head Tapcon Concrete Screw 3/16" x 2-1/4"
Flat head phillips drive 3/16" x1-3/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material up to 3/4", good for mounting 3/4" plywood or 1x material.  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.  #3 Phillips drive. Flat head phillips drive 3/16" x 2-1/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material 3/4" to 1-1/4".  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.  #2 Phillips drive. Hex head phillips drive 3/16" x 2-1/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material 3/4" to 1-1/4".  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.  Use 1/4" socket.
Flat Head Tapcon Concrete Screw 3/16" x 2-3/4" Flat Head Tapcon Concrete Screw 3/16" x 3-1/4" Flat Head Tapcon Concrete Screw 3/16" x 3-3/4"
Phillips Flat Head Tapcon Concrete Screw 3/16" x 2-3/4" Box of 100. Flat head phillips drive 3/16" x3-1/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material 1-3/4" to 2-3/4".  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.  #2 Phillips drive. Flat head phillips drive 3/16" x3-3/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material 2-1/4" to 2-3/4".  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.  #2 Phillips drive.
Flat Head Tapcon Concrete Screw 3/16" x 4"
Flat head phillips drive 3/16" x 4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material 2-1/2"  to 3".  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.   #2 Phillips drive.