You are here:Home > Concrete Anchoring
Choose a sub category:
Perma Grip Concrete Anchors Adhesive Anchoring
Drop In Anchors ITW Buildex Tapcon
Wedge Anchors
Redhead concrete anchors are available for every concrete anchoring application.  Redhead wedge anchors and chemical anchors are still made in the USA and are the choice of contractors from every trade.  The Redhead concrete anchor line up offers wedge anchors, sleeve anchors, drop in anchors, adhesive anchors, Tapcon, large diameter tapcons and so much more.  We are a full line Redhead concrete anchor dealer so if you don't see what you are looking for give as a call, we handle it!
Perma Grip Concrete Anchors Adhesive Anchoring
Perma Grip Concrete Anchors are a great anchor for fastening anything from thin metal, sub floors, 2 x 4 lumber and even thick foam insulation to concrete and masonry . Simply drill a 3/16" hole and hammer in. Solid anchoring every time. Exterior coated and approved for treated lumber, the Perma Grip Concrete anchor nail is available in lengths from 1-1/8" to 7"
Redhead adhesive anchors have lead the way for years. From the tried and true Epcon C-6 epoxy anchor system to the latest A-7 acrylic formula, Redhead adhesive anchors are available for every application.  We also offer pre cut studs, give us a call!
Drop In Anchors ITW Buildex Tapcon
Drop in anchors are designed for use in solid concrete.  Easy install, just drill the hole, blow the hole and set the anchor with the appropriate set tool.  When you are done, you have female threads in the concrete.  We are full line Redhead, Powers and Simpson dealers so if you don't see what you nee, call us we have it!
Original ITW/Buildex Tapcon screws all masonry applications.   Find Tapcon screws in both 3/16" and 1/4" diameters, hex and flat phillips head in sizes up to 6 inches in length.  Packed with appropriate bit.  Also available in stainless steel.  ITW/Buildex is the original concrete screw, don't settle for less! Click here for our selection guide and performance data.
Wedge Anchors
Redhead wedge anchors are still made right here in the USA.  Available in standard zinc, hot dip galvanized and stainless steel. For use in poured concrete.  Easy to install, just drill, clean hole, tap in and tighten.  If you are using the Hilti Kwik Bolt or wedge anchors from Simpson, Powers or others, you will love the Redhead Tru-bolt
Sort By:
Page of 4
A7 Adhesive Anchor Kit
A24 Mixing Nozzle
$1.79Our Price:

Redhead A24 mixing nozzle for use with the A-7 5 oz and 10 oz adhesive anchor systems.
Set Tool For RM-14 Drop In Anchor
Set Tool For RM-14 Drop In Anchor
$2.10Our Price:

Redhead RT-114 set tool.  Required for installing the Redhead RM-14 1/4" drop in concrete anchor.
Set Tool For RM-38 Drop In Anchor
Set Tool For RM-38 Drop In Anchor
$2.90Our Price:

Redhead RT-138 set tool.  Required for installing the Redhead RM-38 3/8" drop in concrete anchor.
Set Tool For RM-12 Drop In Anchor
Set Tool For RM-12 Drop In Anchor
$2.90Our Price:

Redhead RT-112 set tool.  Required for installing the Redhead RM-12 1/2" drop in concrete anchor.
Set Tool For RX-12 Drop In Anchor
Set Tool For RX-12 Drop In Anchor
$2.90Our Price:

Redhead RX-112 set tool.  Required for installing the Redhead RX-12 1/2" drop in concrete anchor.
Set Tool For RX-12 Drop In Anchor
Set Tool For RX-38 Drop In Anchor
$2.90Our Price:

Redhead RX-138 set tool.  Required for installing the Redhead RX-38 3/8" drop in concrete anchor.
ITW Redhead S55 mixing nozzle for use with the C6+  adhesive anchor systems.
S55 Mixing Nozzle
$4.10Our Price:

ITW Redhead S55 mixing nozzle for use with the C6+  adhesive anchor systems.
Redhead E24XL  mixing nozzle for use with the C6-18  adhesive anchor systems.
E24XL Mixing Nozzle
$4.89Our Price:

Redhead E24XL  mixing nozzle for use with the C6-18  adhesive anchor systems.
Flat Head Tapcon Concrete Screw 3/16" x 1-1/4"
Phillips Flat Head Tapcon Concrete Screw 3/16" x 1-1/4"
$10.05Our Price:

Flat head phillips drive 3/16" x1-1/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material up to 1/4"  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.  #2 Phillips drive.
Hex Head Tapcon Concrete Screw 3/16" x 1-1/4"
Hex Head Tapcon Concrete Screw 3/16" x 1-1/4"
$10.05Our Price:

Hex head drive 3/16" x1-1/4".  Box of 100.  These are original Tapcon concrete screw, don't settle for less.  For fastening material up to 1/4"  Simply drill 5/32" hole, at least 1/4" deeper than the anchor and drive in.  Use 1/4" socket.