Products

Business Info


Join our mailing list!






You are here:Home > Pre Tied Ceiling Wire
Ceiling clips, tie wire spikes and bar joist clips tied to 12 gauge ceiling grid wire. Our shooter clips are for use in Ramset, Hilti, Simpson, Powers, Remington and other powder actuated tools. Most powder actuated tools can be used on an extension pole allowing you to support light fixtures, speakers, ceiling grid, cable runs and more to a concrete ceiling from the floor. Our pre tied tie wire spike is a great alternative to shooting where not allowed or practical. Our pre tied bar joist clips can be installed from the floor eliminating a lift in many cases.
Sort By:
Page of 1
PMG12 Purlin Master 4'-12' Purlin Clip Install Tool
Premium clip, 7/8" pin, pre tied to 4' grid wire. Bundle of 100.

PMG12 Purlin Master 4'-12' Purlin Clip Install Tool. The Purlin Master install tool is the first tool that allows you to both tie and install purlin clips and bar joist clips from the floor!  NOTE: Purlin Master only works with the new ADOC-14 and VOH-14 clips!. You really do need to check out the video below.  What this pole does is more than speed up the install process, it truly cuts costs.  How?  First off, you are tying the wire yourself on the fly, not paying someone else to tie.  Secondly, the shipping charges you can save on pre tied wire can be huge!  Buy the tool and the clips and source your wire locally.  Wasted wire is also a thing of the past, you cut your wire to your length.  Reduced stocking charges are also a benefit as you don't have to stock different lengths wire.     Premium clip, 7/8" pin, pre tied to 6' grid wire. Bundle of 100.
Premium Clip 7/8" Pin Pre Tied 8' Bundle of 100
Premium clip, 7/8" pin, pre tied to 8' grid wire. Bundle of 50.
Premium clip, 1-1/4" pin, pre tied to 4' grid wire. Bundle of 100. Premium clip, 1-1/4" pin, pre tied to 6' grid wire. Bundle of 100.
Standard clip1" pin, pre tied to 4' grid wire. Bundle of 100. Standard clip, 1" pin, pre tied to 6' grid wire. Bundle of 100. Standard clip, 1-1/4" pin, pre tied to 4' grid wire. Bundle of 100.
Ramset CL34 T3 Ceilig Clip Pre Tied 3' Pre Tie Wire Wedge Anchor 6' Bundle Of 100
Standard clip, 1-1/4" pin, pre tied to 6' grid wire. Bundle of 100. Ramset CL34 Ceiling Clip Pre Tied 3', Bundle of 100. CL34 ceiling clip tied to 3 foot, 12 gauge ceiling grid wire (finished length approximately 30") For use in the Ramset T3SS and other single shot gas tools. Use for suspending fixtures, ceiling grid, emt, speakers, cable runs etc. Tie wire wedge anchor pre tied with 6' support wires. Bundle of 100.
Pre Tie Wire Wedge Anchor 4' Bundle Of 100 Pre Tie Wire Wedge Anchor 8' Bundle Of 50 Ramset CL34 T3 Ceilig Clip Pre Tied 4'
Tie wire wedge anchor pre tied with 4' support wires. Bundle of 100. Pre Tie Wire Wedge Anchor 8' Bundle Of 50. Ramset CL34 Ceiling Clip Pre Tied 4', Bundle of 100. CL34 ceiling clip tied to 4 foot, 12 gauge ceiling grid wire (finished length approximately 42") For use in the Ramset T3SS and other single shot gas tools. Use for suspending fixtures, ceiling grid, emt, speakers, cable runs etc.
Ramset CL34 T3 Ceilig Clip Pre Tied 6'
Ramset CL34 Ceiling Clip Pre Tied 6', Bundle of 100. CL34 ceiling clip tied to 6 foot, 12 gauge ceiling grid wire (finished length approximately 66") For use in the Ramset T3SS and other single shot gas tools. Use for suspending fixtures, ceiling grid, emt, speakers, cable runs etc. Bar joist clip pre tied to 4' grid wire. Bundle of 50. Easy to install to the bar joist from the floor. Requires L1700 install. tool. Finished length approximately 36". Makes hanging from the bar joist a breeze. Perfect for suspending ceilings, lighting, speakers, cable runs and more. Bar joist clip pre tied to 6' grid wire. Bundle of 50. Easy to install to the bar joist from the floor. Requires L1700 install. tool. Finished length approximately 66". Makes hanging from the bar joist a breeze. Perfect for suspending ceilings, lighting, speakers, cable runs and more.
Bar Joist Clip Pre Tied 8'
Bar joist clip pre tied to 8' grid wire. Bundle of 100. Use this tool to install the VH014 pre tied bar joist clips.  Mounts easily to 1/2 EMT with a set screw connector or can be used on the end of a Lagmaster plus tool. Tie wire wedge anchor pre tied with two 8' support wires. Bundle of 25. This Construction Fastening exclusive hanger will save you time and money when hanging fixtures. Easy to install, drill a 1/4" hole, pound in and pull down with claw of hammer. Finished length approximately 90". Use in any application where you do not want to shoot. Perfect for suspending ceilings, lighting, speakers, cable runs and more. Also available in 6' length. Hangers are shipped doubled over to reduce oversize UPS charges.
Comdangles CD12 Data Cable Support CD12 ComDangle BlueData Cable Support Box of 50 Tie Wire Wedge Anchor
Standard Comdangles data cable support. Box of 50.
CD12 ComDangle Blue Data Cable Support Box of 50
Tie Wire Wedge Anchor Box of 100. Tie wire wedge anchors for suspending ceiling grid wire and jack chain. Easy to install, drill 1/4" hole, hammer in and pull down. A great option when concrete is to brittle to shoot or you are looking for a little more holding power than a powder actuated clip will offer. Available pre tied to ceiling grid wire and now can be easily installed from the floor with the ODM Overhead Drill Machine and I Driver.