You are here:Home > Concrete Anchoring > Perma Grip Concrete Anchors
Perma Grip Concrete Anchors are a great anchor for fastening anything from thin metal, sub floors, 2 x 4 lumber and even thick foam insulation to concrete and masonry . Simply drill a 3/16" hole and hammer in. Solid anchoring every time. Exterior coated and approved for treated lumber, the Perma Grip Concrete anchor nail is available in lengths from 1-1/8" to 7". Performance data.
Sort By:
Page of 1
Perma Grip Concrete Anchor 1-1/8" Perma Grip Concrete Anchor 1-1/2" Perma Grip Concrete Anchor  2"
Perma Grip Concrete Nail 1-1/8".  Box of 100.  Easy to install simply drill 3/16" hole at least 1/4" deeper than intended embedment.  Desired embedment is 3/4" to 1".  The 1-1/8" Perma Grip is ideal for thin metal such as signs, z channel etc. Perma Grip Concrete Nail 1-1/2".  Box of 100.  Easy to install simply drill 3/16" hole at least 1/4" deeper than intended embedment.  Desired embedment is 3/4" to 1".  Typical uses for the 1-1/2" Perma Grip include 1X lumber and 3/4" plywood. Perma Grip Concrete Nail  2".  Box of 100.  Easy to install simply drill 3/16" hole at least 1/4" deeper than intended embedment.  Desired embedment is 3/4" to 1".  Material to be fastened thickness between 1" and 1-/4".
Perma Grip Concrete Anchor 2-1/2" Perma Grip Concrete Anchor  3"
Perma Grip Concrete Nail 2-1/2".  Box of 100.  The Perma Grip in the 2-1/2" length is our top seller, perfect for basement work, garage doors installations, sub floors etc.  Any place you need to fasten 2X material to masonry material. Desired embedment is 3/4" to 1". Perma Grip Concrete Nail  3".  Box of 100.  Easy to install simply drill 3/16" hole at least 1/4" deeper than intended embedment.  Desired embedment is 3/4" to 1".  Material to be fastened thickness between 2" and 2 1-/4".
   
 
One of the most common applications for Perma Grip Concrete Anchors is fastening 2 x lumber to concrete.  The Perma Grip is so easy install, just drill your hole (3/16") at a depth about an inch past intended embedment and hammer it in.  It is secure and reliable.  The anchor has a coating for exterior applications and use with treated lumber.  Applications for the Perma Grip anchor include fastening to block, concrete and other masonry materials.  Beyond the most common of fastening 2 x lumber include installing signs, furring strips, sub floor stringers, garage door bucks and 3/4" plywood.  The Perma Grip Concrete Anchor is simply put, a simple dependable easy to install anchor!